| |
Refrigeration, Air Conditioning and Heating Technology |
| |
-
RAH 100 - Basic Refrigeration I
3 Credit(s)
This course will provide an introduction to the field of heating, air conditioning, ventilation, and refrigeration and the physical laws of the refrigeration process. Students will identify basic system components, and identify basic system designs. Students will become familiar with common test equipment used by the technician. Students will record and compare temperature and pressure measurements, analyze and interpolate temperature and pressure relationships, explain heat and heat transfer, explain energy and energy conversion, and differentiate sensible, latent and total heat. Students will demonstrate proper techniques for refrigerant recovery, system evacuation, pressure testing, and system charging.
|
| |
-
RAH 101 - Basic Refrigeration II
4 Credit(s)
This course is a continuation of RAH 100 and includes the study of advanced systems, cycles and components of domestic and commercial systems. It covers advanced system servicing and maintenance, which includes equipment, tools, materials and instruments.
Prerequisite(s): RAH 100 .
|
| |
-
RAH 102 - Refrigeration Controls
3 Credit(s)
This is a course in the control of refrigeration systems. Students will become familiar with the mechanical and electrical components used in air conditioning and refrigeration systems to create the desired operation of these systems. Various control valves, auxiliary components such as receivers and accumulators, and electrical control components such as defrost timers, and pressure controls will be discussed. The concept of variable speed control of motors and compressors, and variable refrigerant flow will also be presented.
Prerequisite(s): RAH 100 and MEC 120 .
|
| |
-
RAH 110 - HVACR Piping Skills
3 Credit(s)
This is a course in piping skills used by the HVACR technician. Students will cut, fit and join various types of copper, steel, and plastic pipe and tubing.
|
| |
-
RAH 204 - Climate Control
4 Credit(s)
This course is a study of thermodynamics, heat transfer and load calculations for heating and cooling. Atmosphere, stratosphere, cloud formations and greenhouse effects are studied as they relate to climate control for heating and cooling at specific temperatures. The course covers estimating draft calculations, fuel consumption, building material “resistance” factors and service.
Prerequisite(s): RAH 100 and RAH 101 .
|
| |
-
RAH 206 - Heating Systems I
3 Credit(s)
This course will introduce students to gas and oil-fired furnaces. Students will identify furnace configurations such as upflow, downflow, and horizontal, and identify various components of gas and oil furnaces. Students will learn proper installation techniques, and how to perform adjustments and check for proper combustion on gas and oil equipment.
|
| |
-
RAH 207 - Heating Systems II
3 Credit(s)
This course is a continuation of RAH 206 . Topics to be covered include advanced high efficiency heating equipment, dual fuel systems, zoning strategies, VRF heat pumps.
Prerequisite(s): RAH 100 , RAH 206 , and RAH 209 .
Corequisite(s): RAH 235 .
|
| |
-
RAH 209 - Forced Air Systems/Duct Layout
3 Credit(s)
This is a course in both design and fabrication of forced air systems. Students will calculate heating and cooling loads and use that information to design properly sized duct systems. Students will fabricate and install sheet metal duct systems and learn to use sheet metal tools to create duct and fittings.
Prerequisite(s): RAH 100 and RAH 206 .
|
| |
-
RAH 211 - Air Conditioning
4 Credit(s)
This course deals with the fundamentals of air conditioning service. Students test, repair and troubleshoot window air conditioners and residential and commercial systems. Topics covered include properties of air psychrometry, the psychrometric chart, piping of residential and commercial systems and controls in air conditioning. Students become familiar with proper air distribution, wiring of low voltage thermostats and proper procedures in both residential and commercial air conditioning.
|
| |
-
RAH 220 - Hydronics
3 Credit(s)
This is a course in the utilization of water as a heat transportation medium. Students will become familiar with the operation and components of boilers, and chillers, and the operation, theory, and components of chilled water, hot water and steam systems.
Prerequisite(s): RAH 100 , RAH 206 , MEC 120 .
|
| |
-
RAH 235 - Comfort Cooling
3 Credit(s)
This is a course in residential and commercial air conditioning. Topics to be covered include residential air conditioners and heat pumps, commercial split systems, commercial package units, and ventilation and make up air systems in commercial buildings.
Prerequisite(s): RAH 100 , RAH 209 , and MEC 120 .
Corequisite(s): RAH 207 .
|
| |
-
RAH 250 - Alternative Energy Concepts
2 Credit(s)
This is a survey course discussing alternative energy sources as pertaining to the HVACR industries and energy conservation. Topics discussed include geothermal, solar, and wind energy technologies.
|
| |
-
RAH 255 - Building Control Systems
3 Credit(s)
This is a course in the operation of building control systems used in large commercial buildings. This course will cover both pneumatic and DDC control systems used in large commercial buildings such as schools, hospitals, and shopping malls. This course will require a complete and thorough understanding of all electrical, refrigeration, airflow, and hydronic principles learned in previous classes for successful completion. Students should also have above average computer skills for successful completion of this course.
Prerequisite(s): RAH 207 , RAH 220 , and RAH 235 .
|
| |
-
RAH 260 - Certification Preparation
3 Credit(s)
This course will prepare students to take and pass various industry certification exams. Students will prepare for the current EPA certification exams, the current West Virginia Technician certification exams, and various national certification exams such at NATE, ICE, and HVAC Excellence.
Prerequisite(s): RAH 207 and RAH 235 or Program Director permission.
|
| |
-
RAH 265 - Commercial Refrigeration
3 Credit(s)
This is a course in commercial and industrial refrigeration. Topics to be covered include reach in and walk in coolers and freezers, ice machines, compressed air dryers, industrial process cooling, and an introduction to supermarket systems.
Prerequisite(s): RAH 100 and RAH 102
|
Social Science |
| |
-
SS 207 - West Virginia and the Appalachian Subculture
3 Credit(s)
This course examines the interaction of physical and personal factors which have shaped the ways of life of West Virginia’s citizens. The course treats history, government, the economy, religious and educational attitudes and other societal attributes as part of the regional subculture.
|
| |
-
SS 255 - The Global Community
3 Credit(s)
This course is an introduction to intercultural communication; to global problems associated with such topics as security, trade and the environment; to world geography; and to recent changes in the political and economic systems of Europe. Students should take this course in the second year of their program.
Prerequisite(s): ENG 101 or ENG 115 .
Note: See Core Coursework Transfer Agreement information in General Education section.
|
Sociology |
| |
-
SOC 125 - Introduction to Sociology
3 Credit(s)
This course is an introduction to basic sociology concepts, to sociology as a discipline and to the techniques of social research. Included for study are social structure, social relationships, culture, major social institutions and sources of social change.
Pre/Corequisite(s): Satisfactory reading and writing placement test scores or ENG 097 or ENG 101 .
Note: See Core Coursework Transfer Agreement information in General Education section.
|
| |
-
SOC 126 - Social Problems
3 Credit(s)
This course surveys current problems threatening the social order which arise from the social structure, from social institutions or from deviance or social change.
Prerequisite(s): SOC 125 .
Note: See Core Coursework Transfer Agreement information in General Education section.
|
| |
-
SOC 255 - Marriage and the Family
3 Credit(s)
This course investigates recent sociological literature concerning marriage and the institution of the family and crisis within it. It surveys literature on customs and processes, structures across several cultures and the implication of these on recent social changes.
Prerequisite(s): SOC 125 .
|
| |
-
SOC 276 - Criminology
3 Credit(s)
This course is a survey of major theories of criminology, of the criminal justice system and of major correctional treatment methods.
Prerequisite(s): SOC 125 .
|
Spanish |
| |
-
SPAN 101 - Spanish I
3 Credit(s)
This course is an introduction to Spanish. Students develop basic listening, speaking, reading and writing skills. Grammatical structure, pronunciation and basic vocabulary are important aspects of the course. SPAN 101 and SPAN 102 are only offered the fall and spring semesters, respectively.
Pre/Corequisite(s): Satisfactory reading and writing placement test scores or ENG 097 or ENG 101 .
|
| |
-
SPAN 102 - Spanish II
3 Credit(s)
This course is a continuation of SPAN 101 . SPAN 101 and SPAN 102 are only offered fall and spring semesters, respectively.
Prerequisite(s): SPAN 101 or permission of instructor.
|
Speech |
| |
-
SPCH 101 - Interpersonal Communication
3 Credit(s)
This course provides an introduction to the process, effects and variables involved in interpersonal communication. The primary focus is on verbal and nonverbal skills in two-person and small group interactions, particularly within an organizational environment. The major concern is with conflict management, interviewing and dyadic relationships.
Pre/Corequisite(s): Satisfactory reading and writing placement test scores or ENG 097 or ENG 101 .
|
| |
-
SPCH 105 - Fundamentals of Speech Communication
3 Credit(s)
This course includes a study of the elements of oral communication and practice in organizing and delivering short speeches. Emphasis is on the development of effective communication skills and self-confidence.
Pre/Corequisite(s): Satisfactory reading and writing placement test scores or ENG 097 or ENG 101 .
Note: See Core Coursework Transfer Agreement information in General Education section.
|
Surgical Technology |
| |
-
ST 105 - Surgical Technology I
4 Credit(s)
This course is designed to introduce students to the surgical environment, the history of surgery and the legal, ethical, moral and psychological responsibilities of the surgical technologist. Emphasis is placed on the principles of asepsis, safety and the importance of teamwork. Common surgical and diagnostic procedures are introduced. Students must register for a lecture and laboratory/clinical section for this semester.
Corequisite(s): ST 115 .
Pre/Corequisite(s): AHS 103 , BIO 114 ;
|
| |
-
ST 115 - Clinical Practice I
3 Credit(s)
This course provides campus laboratory practice of basic surgical skills, asepsis and sterile technique.
Corequisite(s): ST 105 .
Pre/Corequisite(s): AHS 103 , BIO 114 .
|
| |
-
ST 125 - Anesthesia/Pharmacology for the Surgical Technologist
3 Credit(s)
This course is designed to focus on the medication process in the field of the Surgical Technologist and drug handling. The class will emphasize medications used in the surgical field which includes selection of the correct drug, measurement and mixing, distribution and dispensing, administration, and assessment of the patient and documentation.
Corequisite(s): ST 150 , ST 155 .
|
| |
-
ST 150 - Surgical Technology II
4 Credit(s)
This course builds on the knowledge and skills acquired in ST 105 . Emphasis is placed on orthopedic, plastic and reconstructive, genitourinary and vascular surgical skills. Emphasis continues to be placed on the principles of asepsis and their
Prerequisite(s): ST 105 , ST 115 .
Corequisite(s): ST 155 .
Pre/Corequisite(s): BIO 115 ,
|
| |
-
ST 155 - Clinical Practice II
4 Credit(s)
This course is a continuation of Clinical Practice I. Students build on their knowledge and expertise and are introduced to more surgical specialties in the Operating Room.
Prerequisite(s): ST 115 , ST 105 ;
Corequisite(s): ST 150 .
|
| |
-
ST 175 - Pathophysiology for the Surgical Technologist
3 Credit(s)
This course is designed to provide general knowledge and functions of the human body in disease and illness. The main focus topics will be understanding cell structure as it correlates to disease and pathologies as they relate to each body system.
Prerequisite(s): ST 125 , ST 150 , ST 155 .
|
| |
-
ST 200 - Surgical Technology III
4 Credit(s)
This course is a continuation of ST 150 . Students build on their knowledge and expertise and are introduced to more complex surgeries in the Operating Room.
Prerequisite(s): ST 150 , ST 155 .
Corequisite(s): ST 210 .
|
| |
-
ST 210 - Clinical Practice III
4 Credit(s)
This course is a continuation of Clinical Practice II. Students build on their knowledge and expertise and are introduced to more surgical specialties and take a more advanced role in the Operating Room.
Prerequisite(s): ST 155 , ST 150 .
Corequisite(s): ST 200 .
|
| |
-
ST 250 - Surgical Technology IV
4 Credit(s)
This course is a continuation of ST 200 . Students build on their knowledge of advanced surgical procedures, trauma and emergency surgeries.
Prerequisite(s): ST 200 , ST 210 .
Corequisite(s): ST 255 , ST 260 .
|
| |
-
ST 255 - Clinical Practice IV
4 Credit(s)
This course is a continuation of Clinical Practice III. Students build on their knowledge and expertise they have acquired throughout this program.
Prerequisite(s): ST 200 , ST 210 .
Corequisite(s): ST 250 .
|
| |
-
ST 260 - Surgical Technology Seminar
2 Credit(s)
This course is designed for advanced surgical technology students in the professional role of the Surgical Technologist in the Operating Room with special emphasis placed on preparation for the National Certification Examination.
Corequisite(s): ST 250 , ST 255 .
|
Welding |
| |
-
WELD 101 - Oxyacetylene Welding
1 Credit(s)
This five-week course presents basic principles of oxyacetylene welding, cutting, and brazing. The course will focus on proper selection and use of equipment, safety, proper welding techniques, and setup.
|
| |
-
WELD 102 - Basic Shielded Metal Arc Welding
6 Credit(s)
This 10-week course presents the nomenclature and setup procedures for the shielded metal arc welding (SMAW) process and teaches basic processes. Students weld on pads in each of the four welding positions using different electrodes.
|
| |
-
WELD 110 - Intermediate Shielded Metal Arc Welding
3 Credit(s)
This five-week course is a continuation of WELD 102 . Students become proficient at groove welding with and without backing.
Prerequisite(s): WELD 102 .
|
| |
-
WELD 112 - Advanced Shielded Metal Arc Welding
6 Credit(s)
This 10-week course continues shielded metal arc welding (SMAW) to help students become proficient in 2G, 5G, 6G, and pipe.
Prerequisite(s): WELD 102 .
Pre/Corequisite(s): WELD 110 .
|
| |
-
WELD 115 - Fabrication Drawing & Fitter Skills
3 Credit(s)
This course will provide an introduction to reading and interpreting welding print symbols, welding blueprints, isometric drawings, P&ID’s, and working drawings used in trades and crafts. Focus is on dimension, shape, fabrication and assembly. Applies basic mathematics to calculate take offs, make material cut list, and provides the students the skills needed to properly layout and fabricate their work.
|
| |
-
WELD 202 - Beginning MIG (GMAW) Welding
3 Credit(s)
This five-week course introduces students to the safety, nomenclature, and set-up procedures for gas metal arc welding (MIG). Students will perform open SingleV-Grove welds on plate without backing. Students will weld in all four positions. Additional topics include wire specifications, joint design, shielding gases, and production of beads and joints.
|
| |
-
WELD 204 - Advanced MIG (GMAW)
3 Credit(s)
In this five-week course, which is a continuation of WELD 202 , students will continue to develop advanced skills in MIG welding. Students will perform welds in all four positions on plate without backing and aluminum. Welds will be tested to AWS non-destructive standards.
Prerequisite(s): WELD 202 .
|
| |
-
WELD 206 - Beginning TIG
3 Credit(s)
In this five-week course, students will be introduced to gas tungsten arc welding (GTAW or TIG) with an emphasis on safety, machine set up, filler rods, and shielding gasses. Students will produce beads, bead patterns, and joints in all four positions. Students will perform open route welds on plate without backing.
|
| |
-
WELD 208 - Advanced TIG
3 Credit(s)
In this five-week course, which is a continuation of WELD 206 , students will continue to develop advanced skills in TIG welding. Students will perform welds in all four positions on plate with backing and on pipe. Welds will be tested to AWS standards.
Pre/Corequisite(s): WELD 206 .
|
| |
-
WELD 210 - Flux Core Welding
3 Credit(s)
This is a five-week course in which students will learn the safety, nomenclature, set-up procedures, and techniques associated with flux core arc welding. Students will weld on pads in each of the four positions. Techniques will include beads, lap joints, tee joints, and butt joints.
Prerequisite(s): WELD 202 .
|
| |
-
WELD 215 - Metallurgy
2 Credit(s)
This course presents basic principles of metallurgy as they relate to welding and fabrication. Students will study properties of both ferrous and non-ferrous metals. Topics will include manufacture, weld preparation, surface preparation, heat treatment before and after welding, alloys of special steel, and classification of steels.
|
| |
-
WELD 220 - Layout and Fabrication
3 Credit(s)
Students will perform fit-up procedures to set up and align parts for fabrication according to blueprint design and specifications. Students will apply mathematics for layout. The course includes estimation, structural and pipefitting techniques, and making templates and jigs.
Prerequisite(s): APT 110 , WELD 112 , WELD 204 .
|
| |
-
WELD 225 - Downhill Pipe Welding
3 Credit(s)
This five-week course will provide the students with a thorough understanding of downhill pipe welding procedures and weld quality. It provides training to develop the skills necessary to produce quality welds on open root carbon steel pipe in the 5G and 6G positions, using E6010 and E8010 electrodes.
Prerequisite(s): WELD 102 , WELD 110 , WELD 112 .
|
| |
Page: 1
| 2
| 3
| 4
|
Student Portal
Transcripts
Bookstore
Offices/Services
Library
Employment
News
Calendar
College Catalog
Directory
Print this Page